Cat® 1800

Patented 5-Piston Pump

Setting a new standard in the pressure washer industry, the CAT® 1800 PSI electric pressure washer is powered by a patented 5 piston pump, generating the highest water flow per PSI of any electric pressure washer.  The high flow, high pressure performance ensures superior cleaning power.

Impact Force

Our focus was to have the highest working water flow and working pressure – to have the optimized impact force for the fastest, most effective clean. Other pressure washers on the market chase high pressure at the expense of water flow – leaving you with poor cleaning performance and long job times.

Durable Components and Design

An all metal gun assembly, real rubber hose and maintenance free motor ensures reliable performance throughout its effective life.  The compact design with thoughtful organization features ensures set up, use and storage are easy.  

Comprehensive Product Warranty and Trust

No questions asked – we’ve got you covered.  2 years on the entire unit and accessories. Contact our customer support at 1- 844-777-4550 for further assistance.

• 4 Versatile Spray Tips (0,15,25,40) to tackle light, medium and heavy cleaning
• 600 ml Foam Blaster to remove dirt and grime
• Powerful 13-amp motor and 5-piston pump generate up to 1800 PSI/2.0 GPM for maximum cleaning power
• 20-foot-high pressure real rubber hose
• 35 foot electric cable with GFCI protection
• Metal gun and wand
• Compartment storage for all accessories
• Cleaning needle

English | Spanish
*Click to download manuals

TWO (2) YEAR WARRANTY

This product is guaranteed to be free from defects in material and workmanship for two years from the date of its original purchase. If such a defect appears during the warranty period, upon presentation of proof of purchase, Active Products will elect to either 1 replace the product or defective component at no charge and free shipping or 2 refund the full purchase price to the owner (at its discretion).

WHAT IS NOT COVERED?

The warranty is void if the equipment is used for commercial, rental or industrial purposes.

This warranty does not cover accidental damage, unreasonable use, and normal wear and tear like belts, chains and tine, use of improper detergents, freezing, neglect, or non-compliance with the operating Instructions. The warranty does not cover loss of use or other consequential damages arising from any of the above, nor does it cover repairs made or attempted by unauthorized persons.

The Motor does not start?

Cause: When the unit is in the idle state the water in the pump reaches max pressure causing the motor to switch off.
Solution: Engage the trigger of the gun to let water flow out and relieve the pressure in the pump

Cause: The extension cord is too long or is not the proper gauge.
Solution: Replace the extension cord with either a 25’ (7.6 m) 14/2-gauge cord or a 50’ (15 m) 14/2-gauge cord.

Cause: The pressure washer circuit breaker was tripped off.
Solution: Allow the device to cool, and then restart it.

Device does not reach high pressure?

Cause: Water supply is low
Solution: Check the garden hose for kinks, leaks or blockage if the problem still persists, change hose to one with a 1” (25 mm) or 5/8” (13 mm) dimensioned garden hose.

Cause: The pump is sucking air.
Solution: Check if all hoses and fittings are airtight. Turn the device OFF, and purge the pump by pulling the trigger on the spray gun until a steady flow of water emerges through the nozzle. 

Detergent function is not working?

Cause: Detergent is too thick
Solution: Dilute the detergent

Cause: The filter on the detergent suction tube is clogged.
Solution: Run warm water through the filter to remove build-up.

Cause: The discharge nozzle is obstructed
Solution: Blow or remove debris with a fine needle

Motor hums but fails to run?

Cause: Supply voltage below minimum requirement.
Solution: Verify that only the pressure washer is running on the circuit.

Cause: System has residual pressure.
Solution: Turn the device OFF, pull the trigger on the spray gun to release pressure, and then turn the device back ON.

Cause: Voltage loss due to the extension cord
Solution: Unplug any extension cords attached and plug the unit directly into the outlet.

Cause: Residual friction among components. The device might hum.
Solution: Disconnect water supply and power ON for 2 to 3 seconds. Repeat this procedure a few times, or until the motor starts.